Application of laser engraving and cutting of gold
Application of laser engraving and cutting of gold
Today, a variety of metals, especially metals and precious alloys, are used to make jewels. In the past, mechanical and hardening methods for engraving and cutting of these metals have been widely used. At this time, engraving on gold and jewelry was done to raise its value and show the social class. . But now the gold and jewelry industry is another form of engagement and engraving on the jewelry of the fashion industry. To this end, the use of laser technology has become very important. The laser cutting machine is capable of cutting and engraving various metals, including gold. Using a laser, gold and jewelry with a delicate and intricate form of work does not look hard and far from the mind. Additionally, the laser delivers maximum cost and flexibility in the least amount of time, allowing designers to create new and innovative designs.
Before the laser was used, cutting a 1 mm pendant with a hand would take about two days. This is while the laser fiber is able to cut all types of pendants in the least time (between 10 and 30 minutes). For this reason, laser technology can be considered as a good and pleasant incident for gold and jewelry manufacturers. Because when the number of orders is high, the market need is easily delivered through the laser and the products will be of high quality.
As mentioned, the use of lasers for engraving and cutting gold is a novel way to create up-to-date designs. Lasers are used to produce all kinds of jewelry (watches, rings, necklaces, etc.) and different styles (classic, modern, etc.). Lasers provide this feature to designers and manufacturers of gold and jewelry that can easily and in the shortest time create complex shapes. So that the personalization of gold and jewelry, the carving of types of designs and writing on these materials will be a comfortable and uncomplicated work. The deep-seated carved images on the gold are never cleared and do not damage the texture of gold.
The following are some of the important benefits of using this technology in the jewelry industry:
– Due to the fact that the beam of laser through the mirrors in the device, concentrated to a specific point of the incandescent and heated by cutting the metal, the edges are cut smooth and uniform and without distortion.
One of the main advantages of using laser in all industries is the ability of this technology to create complex and delicate forms. Just send your design through a computer to laser and enjoy the conversion to a beautiful and unique product.
– Lasers have the ability to cut the thinnest metals in the best.
– With this technology, all designs can be produced in the shortest time and with a large number.